Incubators
At droptestkits.com we offer a full range of professional quality
incubators developed to meet the needs of engineers, facilities
managers and water treatment professional.
2slide Incubator
This versatile model offers constant temperature pre-set incubation.
The ideal unit for single cooling tower sites where only 1 or 2
Dipslides require incubation and the investment in larger incubators
is not an option.
Our 2slide incubator unit is Pre-set to 30 0C (35 0C to
order) and runs from a regular 220 - 240v Mains supply.
Internal fuse and over-temperature protection is built In
to provide safe & reliable long term operation. Each
GNAT is pre -set during manufacture but the optional thermometer
can be used for periodic checks if required.
The 2slide is completely maintenance free and needs only
a 30-minute warm up period before incubation can begin.
|
|
The Discovery Incubator
The Discovery incubator provides laboratory
standard incubation for microbiological and chemical reagent
testing in an easy to use, portable case. The Discovery
is available in 2 models, mains 220 - 240v (110 to order)
or with the added facility of 12v operation via a vehicle
cigar lighter socket. A convenient feature of both units
is the integrated power supply - this means no additional,
bulky transformer is required for mains use.
Incubator Specification:
- Holds a minimum of 8 slides.
- Temperature variable.
- Robust case and lid, high build quality.
- Electrically certified to all standards.
|
|
The Cultura Incubator
The Cultura incubator offers laboratory standard
incubation for microbiological and chemical reagent testing
in an easy to use, compact format.
Incubator Specification:
|
|
The Challenger Incubator
Provides laboratory standard incubation for microbiological
and chemical reagent testing. The 6400 Series is available in 2
models. the DM for mains 220 - 240v (110 to order) or the MV, with
the added facility of 12v operation via a vehicle cigar lighter
socket. A convenient feature of both the DM & MV is the integrated
power supply - this means no additional, bulky transformer is required
for mains use. Both incubators are supplied with a spirit thermometer
and power cable ready for use!
The tough molded case and shatterproof polycarbonate lid
are easy to wipe clean and the ergonomic location of the
controls under the lid avoids the risk of accidental adjustment
whilst the unit is in operation. Connectors for power cables
and associated fuses are located on a convenient panel at
the rear of the incubator. Typical Load - 25 Dip-slides
or 30 Petri Dishes (95mm).
Specification
|
|
|
6400
DM |
6400
MV |
| Supply |
220-240v (110-120v) AC |
12v DC & 220-240v (110-120v) AC |
| Power Rating |
64 Watts |
52 Watts |
| Weight |
1.9Kg |
2.8Kg |
| Temperature Control |
Proportional Electronic |
Solid State Bi-polar |
| Temperature Range |
Both ambient
+ 5 to 450 C +/- 0.50 C |
| Chamber size (useable) |
Both 18 x 18
x 15 cm (5.2 Litres) |
| External size |
Both 26 x 32
x 27 cm |
Portable
Incubator
We are pleased to announce the release of
our new 40 slide incubator which is offered with mains or
12 volt power.
Incubator Specification:
- Holds a minimum of 40 slides.
- Temperature variable.
- Robust case and lid, high build quality.
- Can be used in car.
- Electrically certified to all standards.
|
New
portable incubator |
For more information please call on 01604 686 995
or email info@droptestkits.com.
|
