MILD STEEL 4 COUPON RACK

KEY FEATURES

• Suitable for higher temperatures and pressures
• Maximum operating pressure is 10 Bar or 145 psi
• Can hold up to 4 corrosion coupons
• Water Inlet & Outlet 1″ BSP, male
• Corrosion coupon size 3 x 1/2″

DESCRIPTION

All DTK corrosion coupon holders incorporate a built-in flow control which will divert water flow through the rig at the ATSM recommended rate of 0.6 to 1.8 m/s for cooling water systems at presures between 1 and 7 Bar (14.5 to 101 psi).

Our corrosion coupon holders are designed for easy and inexpensive monitoring of corrosion within cooling water systems. Part of the cooling water is diverted from the main flow into the coupon holder where it passes over corrosion coupons before being returned to the cooling system. Corrosion coupons can be inserted and removed for analysis without the need to close down the system.

NOTES

The general layout of the corrosion coupon rack can be seen at the top, however the configuration is adaptable to the situation.

Assembly required. PTFE tape is included for sealing joints. Corrosion coupons not included but are available here.

ORDERING INFORMATION